2N IP Uni - Page 21

Installation manual 2N® IP Uni
21 / 58
•
•
•
Part No. 9159014EU/UK
Part No. 9159014US
Axis Part No. 01404-001
2N
®
2Wire
(set of 2 adaptors and power source for EU/US/UK)
The2N
®
2Wireconverter allows you to use existing
wiring (2 wires) from your original door bell or door
intercom to connect any IP device. You don’t have to
configure anything, and you only need one2N
®
2Wireunit at each end of the cable and a power
source connected to at least one of these units.
The2N
®
2Wireunit then providesPoEpower not only
to the second converter, but also to all other
connected IP end devices.