2N IP Uni - Page 44

Installation manual 2N® IP Uni
44 / 58
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
no signal; 100 mA
standby; up to 10 mA
Transition to standby w/o signal: 10 s
Input level – basic:100 mV – 6 V
rms
Input level – increased:1 V – 35 V
rms
Input impedance:2 kΩ parallel with 0.3 H
Output current, 1 Ω load:2.2 A
rms
(sine wave)
Full power output:1.6 A
rms
(pink noise)
Output current, 8 Ω load:730 mA
rms
sine wave signal
Half power output:520 mA
rms
pink noise signal
Output short-circuit resistance:unlimited time
Frequency characteristics:100 Hz – 5KHz ±3 dB
Temperature range:-20 – +50 °C
Covering:IP65 (with round cable of 5–10 mm diameter)
Dimensions:144 x 100 x 31 mm
Weight: 0.3 kg