Gateway Configuration
System Parameters
General
Saving call data (CDR) – select the call types on which records are to be saved
into the CDR file.
Gateway ID – identifies numerically in the CDR in2N StarGate / BlueTower
®
case multiple devices generate the CDR in the network.
General selection of SIM – select the cards for the SIM card holder to be used
by the gateway. This parameter has no influence on the gateways connected to
the system.2N SIM Star
®
According to GSM groups – select the SIM card according to the settings
of the Outgoing GSM group to which the wireless module is assigned.
SIM card in slot # – hardware selection of the SIM card holder position.
This setting overrides the Outgoing GSM group setting!
Number for remote control (PRI 1, PRI 2) – enter the remote control
number for data calls via the B-channel of the ISDN PRI 1 or PRI 2 interfaces.
Automatic Logout of GSM Modules
This function is used for automatic logout of wireless modules from the wireless
network in a selected time interval. If the logged-in modules are occupied by a call, the
logged-out modules log in automatically. If the traffic drops, the modules log out again
from the network at random intervals.
Enable automatic logout – enable/disable the feature.
Logout hour – set the time interval for the wireless modules to start logging out
randomly from the wireless network.
Login hour – set the time interval for the wireless modules to start logging in
back to the wireless network.
Min. logged-in modules – set the minimum count of wireless modules that
remain logged-in.
Summer / Winter Time
Automatically switch to summer/winter time – enable an automatic change
of the gateway system time at the time of transition to/from the daylight saving
time.
Date of switch to winter time [dd.mm] – transition day and month.
Date of switch to summer time [dd.mm] – transition day and month.
System Restart
Enable system restart – enable/disable the feature.
Time of system restart [hh:mm] – set the time for system restart.
To Next Page
Loading...
