3B6 SLIM - System Start Up - Initial Steps; Power-Up, Self-Test, and Mode Selection

System Start Up
9
The SLIM is equipped with multiple pushbutton functions and display pages to indicate
the crane condition information such as, LMI and Auto Diagnostics. The SLIM display will
automatically power up once the machine is started. The unit will indicate the software
version, date, crane model number and perform a self test.
3B6 Operator Manual
The display will change to the LMI SET-UP screen for Configuring the crane setup.
The system will store the last operating mode selected that was confirmed. See page 11
for all programs available. Use the UP or DOWN pushbutton to scroll to a different
operating mode or press and release the ENTER pushbutton to confirm the indicated
operating mode. The system will be in an inactive mode and audible/ visual alarms
enabled until the system is setup and confirmed.
Please Confirm
Enter
ACT
a
r
h
l
STOP
Index
+
-
TXW003 28AUG12
BT26106 V3.1
Enter
ACT
a
r
h
l
STOP
Index
+
-
MAIN BOOM 360
Please Confirm
The display will change to the ROPE selection ( Parts of Line) Using the UP or DOWN
pushbuttons select the proper parts of line and press and release the ENTER pushbutton
to confirm. The system will be in an inactive mode and audible/visual alarm enabled until
the system is setup and confirmed.
Enter
ACT
a
r
h
l
STOP
Index
+
-
Loading Table
ROPE 6
NOTE: Start up screen
SAE chart is V3.1. Metric chart is V4.