18
Partial Zeroing, Partial x 2, Total, Totals and Tare Procedure
Press and release the MENU pushbutton. The display looks as below.
Delete
Partial
Partial x 2
Total
Product Totals
Tare
to cancel the tare.
to cancel the last weighing .
Partial x 2
LAST WEIGHT CALIBRATION FUNCTION: When the last bucket load
did not empty completely, to find out the effective total quantity
unloaded weigh the material which has remained in the bucket and use
the PARTIAL X 2 CANCEL function; this function will remove twice the
last value weighed from the total so that you can find out the total value
of material which has really been put into the truck.
Total
to cancel the total load
Product
Totals
to cancel the totals in the memory (end of the day, end of the week, etc.).
This operation takes about 30 seconds.
Tare
Partial
Press and hold the HOME pushbutton to return to the main display.
Top Master User Manual
Press and release the DOWN pushbutton to scroll to the proper line and press and
Release the ENTER pushbutton to confirm.
To Next Page
Loading...