3B6 TOP MASTER User Manual

The Top Master display can be moved between 4 different machines and store 4
separate calibrations.The machine function can select the machine in use and thus its
specific calibration at any time.
To set the machine in use proceed as follows: Press and release the UTILITY
pushbutton. The display looks as below.
Machine Function
Machine 1 = 1st calibration
Machine 2 = 2nd calibration
Machine 3 = 3rd calibration
Machine 4 = 4th calibration
12
Tare
Disable
Count DW
Machine x
Use IR
MultiProduct
Correction 100
Time Setting
X=1 or 2 or 3 or 4
Press and release the UP or DOWN pushbutton to scroll to the Machine line.
Then use the LEFT (-) or RIGHT (+) pushbutton to select the proper machine
number.
Press and hold the HOME pushbutton to return to the main weighing display
Top Master User Manual
NOTE!
Correction setting is used when adjusting the load when you have an error due to
cold or hot conditions.
It has no effect on the calibration and should be set back to 100% if adjusting it in
these conditions.

3B6 TOP MASTER Specifications

General

Brand	3B6
Model	TOP MASTER
Category	Accessories
Language	English