To Next Page

To Previous Page

Tare

Disable

Count Down

Machine

Use IR

MultiProduct

Correction 100

Time Setting

To activate or deactivate the Count Down function proceed as follows:

Press and release the UTILITY pushbutton, the display appears as below:

Count Down Function

When using this feature you must enter a Target load in order for it to count down the

weight, see page 19-20. Once activating the COUNT DOWN function the maximum

load value is shown on the display. Each partial is subtracted from the maximum load

and when the maximum load is exceeded, the audible alarm will sound when the load

is below zero.

Tare

Disable

*Count Down

Machine

Use IR

MultiProduct

Correction 100

Time Setting

Press and release the UP or DOWN pushbutton to scroll to the Count Down

line and press and release the ENTER pushbutton to enable the function. The

asterisk to the left of “Count Down” confirms that the weighing is Counting Down

now.

Top Master User Manual

To disable the function, follow the procedure above, the asterisk will disappear.

Questions and Answers:

Need help?

Do you have a question about the 3B6 TOP MASTER and is the answer not in the manual?

3B6 TOP MASTER Specifications

General