Target (Maximum Load)
20
Target
Unit Meas.
Customer
Product
Operator
Truck N.
Max N.W.
Project
Press and release the DOWN pushbutton to scroll to the TARGET line..
Use the LEFT (-) or RIGHT (+) pushbutton to change the value required and confirm by
pressing and releasing the ENTER pushbutton.
When the limit is reached the system sound an intermittent audible alarm.
Note: the Target or Maximum Load is displayed on the basis of the Unit of measurement
chosen.
In any case the minimum increase/decrease step is 100 kg/lbs. or 0.1 ton.
If the Count Down function is activated the operative Target will be the initial Count
Down value.
Top Master User Manual
To Next Page
Loading...