18 CHAPTER 2: VCX BASIC TELEPHONE — MODEL 2101
CAUTION: This option is for administrator use only. Unauthorized
modification of these parameters will disconnect your phone.
4 Soft buttons — Use the soft buttons to navigate through Display Panel
options. A button’s function depends on the option selected. The buttons
are, left to right:
■ Slct (Select) — Use this button to select a displayed item. For example,
you can use this button to automatically dial a previously placed or
received call or a missed call.
■ Back — Use this button to move the cursor backwards one space and
delete the current space). You can also use this button to sort
displayed items.
■ Exit — Use this button to exit the currently displayed option.
5 Scroll buttons — Allow you to scroll through the items in the telephone
Display Panel.
6 MSG (Message) button — Accesses your messages (voice, e-mail, or
fax) through the VCX Messaging system. See the IP Messaging Module
User Guide.
7 Telephone key pad
8 Volume control buttons — Raise or lower the volume of the ringer, the
speaker, or the handset. See
Controlling the Volume.
9 Hold button — Places a caller on hold. See Putting a Call on Hold.
10 Transfer button — Enables you to send a currently active call to another
telephone. See
Transferring a Call.
11 Call Toggle button — Enables you to manage two telephone calls at the
same time. See
Answering a Second Call.
12 Feature button — Enables you to access features that are not assigned
to an Access button. For example, you can enable and disable Do Not
Disturb. To enable a feature, press the Feature button and then press the
code on the telephone keypad. For more information on feature codes,
see
Chapter 8.
The telephone LabelMaker, available through the 3Com web site, enables
you to print labels for the feature buttons. See Printing Labels
.
To Next Page
Loading...