3Com 3102 - Access Buttons; Status Lights for System Appearance Buttons

30 CHAPTER 4: VCX BASIC TELEPHONES — MODELS 3101 AND 3101SP
Access Buttons Figure 5 displays the Access buttons on the VCX Model 3101 and 3101SP
Basic Telephones. The functions assigned to these buttons cannot be
changed.
Figure 5 Access Buttons
Access buttons have the following settings:
1 The first button controls a line for incoming and outgoing calls (System
Appearance button; SA1).
2 The second button controls a line for incoming and outgoing calls
(System Appearance button; SA2).
3 Feature button — Allows you to access features that are not directly
assigned to an Access button on your telephone. For example, you can
use the Feature button to enable and disable Do Not Disturb. For more
information on feature codes, see
Chapter 8.
4 Transfer button — Sends the currently active call to another telephone.
See
Transferring a Call.
The telephone LabelMaker, available through the 3Com web site, enables
you to define and print a new label for your Access buttons. See Printing
Labels.
Status Lights for
System Appearance
Buttons
An Access button that is set up for incoming and outgoing calls is called a
System Appearance button. The light beside each System Appearance
button indicates the status. See
Table 4.
VCX 3101SP
VCX 3101