Setting up a Conference Call 77
If transmission of Caller ID information is disabled and you want to send
your Caller ID for the next call only:
1 Pick up the handset.
2 Press Feature + 890.
3 Dial the number. Your ID is sent to the caller.
Setting up a
Conference Call
The conference feature enables you to have three people on one call
(3-way calling).
If your telephone is part of a bridged extension, see Call Transfer, Call
Conferencing, and Bridged Line Calls for additional information.
The following sections describe how to set up an unannounced
conference call and an announced conference call. In either type of
conference call, if one of the participants hangs up, the other two
participants remain connected.
Unannounced
Conference
In an unannounced conference, you conference in the person without
notifying that person:
1 While on a call, press Conference or press Feature + 430. The system
places your caller on hold.
2 Dial the number of the person you want to conference in.
3 Press Conference or Feature + 430 again. The three-way conference
begins when the recipient answers the call.
Announced
Conference
In an announced conference, you announce to the recipient that you are
conferencing them into a call. The recipient can then decide whether to
take the call:
1 While on a call, press Conference or Feature + 430. The system places
your caller on hold.
2 Dial the extension of the person you want to conference in, then press
the OK button (or press Feature + 120).
3 When the called party answers, announce the conference.
■ If the recipient wants to take the call, press Conference or
Feature
+ 430. Now three people are on the same call.
To Next Page
Loading...