Speed Dialing 83
To replace an existing speed dial number, use the second soft button
to delete each digit.
3 Press the second soft button under the Display Panel (or press #), then
enter the number you want to associate with this speed dial. Include all
prefix numbers that you would normally dial, such as a 9 or 8 or 1 to
access an outside line, and, if necessary, the country code or area code.
4 To store the number, press the OK button (or press #).
Alternatively, you can directly configure a speed dial number with a speed
dial Access button:
1 Press the Program button (or press Feature + 410).
The Main menu appears.
2 Press [3] to access the Speed Dial menu.
3 Press the speed dial Access button you want to configure.
4 Enter the number you want to associate with this button. If a number is
already configured for this button, you can enter a different number.
5 To store the number, press the OK button (or press #).
Make sure you write the name of the person whose number you have
stored and the corresponding Speed Dial Access button or feature
code.
Dialing Speed Dial
Numbers
The method you use to dial a configured speed dial number depends on
your phone and whether or not the number is mapped to a speed dial
Access button.
To dial a number configured as a speed dial on a VCX phone with one or
more speed dial Access buttons, press the appropriate button. If the
number is not associated with a button, use the next procedure.
To dial a configured speed dial number on any VCX phone:
1 Pick up the handset (if you want to use you phone’s speaker, go to
step
b).
2 Press Feature.
3 Enter the feature code associated with the number you want to dial.
For example, if the number you want to speed dial is mapped to Speed
dial 2
, enter the following through the TUI:
Feature + 602
To Next Page
Loading...