3Com 3102 - Access Buttons

Access Buttons 23
16 Speaker button — Enables you to use the speaker phone feature. Press
the Speaker button before you dial a call, when your telephone is
ringing, or while a call is in progress. To turn the speaker off and resume
the conversation, pick up the handset.
17 Volume control buttons — Enables you to adjust the volume of the
ringer, the speaker, or the handset. See
Controlling the Volume.
18 Mute button — Use this button to prevent callers from hearing you,
while you can still hear your callers. See
Muting Calls.
19 Hands Free button — Allows you to answer internal (intercom) calls
without picking up the handset. An external call (a call from outside your
VCX system) rings to your telephone as usual. See
Using the Hands Free
Feature. The light next to the Hands Free button remains red as long as
this option is enabled.
Access Buttons Figure 3 shows the 18 Access buttons.
Figure 3 Access Buttons
Access buttons have the following settings:
1OK — Press the OK button to send a call.
2 Release — Press the Release button to disconnect a call.
3 Call Park — Enables you to place a call in a holding pattern so that it can
be retrieved from another telephone in the system. See
Call Park.
4 Call History — Enables you to view the last 10 missed, answered, or
dialed calls on the Display Panel. See
Using the Telephone Display Panel.
1
2
3
4
5
6
7
8