3Com 3102 - Off-Site Notification

68 CHAPTER 8: FEATURE CODES
Table 9 VCX Feature Codes (Alphabetical by Feature or Task)
Feature Feature Code Entry Description
Barge In Feature + 428 Used with Silent Monitor. See Silent
Monitor and Barge In.
Beep — Configure Feature + 330 Prompts you to enter the extension you
want to page. Press # after entering the
extension, then press Feature + 331 to
send the page.
This feature is useful, for example, if one
user wants alert another user to send in
the next job applicant.
Beep — Send Feature + 331 Sends a page (a beep) between phones.
The sending phone displays the target
extension. The target extension displays
the sending extension.
Block Caller ID for all calls
(Enable/Disable)
Feature + 889
Or
*889
See Controlling Caller ID.
Block Caller ID for next call
(Enable/Disable)
Feature + 890, then <destination>
Or
*890*<destination>
See Controlling Caller ID.
Call Forward Busy Feature + 467, then <destination>
Or
*467*<destination>
See Call Forward Busy Line.
Call Forward Ring No Answer Feature + 466, then <destination>
Or
*466*<destination>
See Call Forward Ring No Answer.
Call Forward Universal Feature + 465, then <destination>
Or
*465*<destination>
See Call Forward Universal.
Call History Feature + 462 See Viewing the Call History.
Call Park — Park a Call Feature + 444, then <call park
extension> (or accept the default)
See Call Park.
Cancel Feature + 111 Cancels the current operation.
Class of Service (COS)
Override
Feature + 433, then <your extension>,
then <your mailbox password>+ #, then
<outside party number>
See Class of Service Override.
(continued)