164 CHAPTER 7: MANAGING AND MONITORING YOUR NETWORK
To locate a rogue:
1 From the Alerts panel, click on Rogue Detection. The Rogue Detection
tab is displayed, containing the current rogue list.
2 View statistics on a single rogue. Select a rogue from the Rogue List.
Select the Activity Log tab.
The number of listeners (other MAPs) that detected the rogue are
displayed. The larger the number of listeners detecting the rogue, the
easier it is for 3WXM to locate the rogue in the RF coverage area.
Under Status, the first detected event and the first “not detected” event
are displayed.
3 Locate the device in the RF coverage area. Select a rogue from the Rogue
List, and click Locate.
4 Locate the device in the RF coverage area. Select a rogue; click on
the Rogue Detection window’s toolbar.
The location of the rogue is displayed in the RF coverage area.
To Next Page
Loading...
