20 CHAPTER 1: GETTING STARTED
To configure 3WXM Services:
1 Select Tool s > 3WXM Services Setup dialog box from the 3WXM main
tool bar. The 3WXM Services Setup wizard is displayed.
2 You can optionally configure the following:
Select the arrow buttons to change the HTTPS Server Port, which is
the port on which 3WXM Services listens for requests from 3WXM
client.
Select the arrow buttons to change the SNMP Trap Receiver Port,
which is the port on which SNMP traps are received. Also select the
trap type (SNMPv1 or SNMPv3) you want 3WXM Services to receive
from WX switches.
To Next Page
Loading...
