60 CHAPTER 3: CONFIGURING WIRELESS SERVICES
MAPs (and consequently, radios) need to be added to 3WXM after
creating a radio profile. For more information about adding radios, refer
to one of the following:
“Using RF Auto-Tuning” on page 91
“Using RF Auto-Tuning with Modelling” on page 99
“Using RF Planning” on page 113
To create a radio profile and map a service profile to it:
1 Expand the WX switch in the tree topology to which you want to add a
radio profile.
2 Right-click Radio Profiles > Insert.
The Create Radio Profiles wizard is displayed.
3 From the Radio Profile tab, enter the name of the radio profile. Click
Service Profile Selection at the top of the wizard.
4 Select the employee service profile in the Available Service Profiles list.
Click Add.
To Next Page
Loading...
