EasyManua.ls Logo

3Com 4200G PWR - Default Settings

3Com 4200G PWR
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 CHAPTER 1: INTRODUCING THE SWITCH 4200G FAMILY
Default Settings Table 6 shows the default settings for the Switch 4200G Family.
Tab le 6 Default Settings
Feature Switch 4200G
Automatic IP Configuration Enabled
Port Status Enabled
Port Speed Auto-negotiated
Duplex Mode Auto-negotiated
Flow Control Auto-negotiated
Broadcast Storm Control Enabled
Virtual LANs (VLANs) All ports belong to the untagged Default VLAN
(VLAN 1) with IEEE Std 802.1Q-1998 learning
operational
Management VLAN Fixed as VLAN 1 on 4200G units. Can be any
VLAN for 4200G units.
Link Aggregation Control
Protocol (LACP)
Disabled per port
IP Multicast Filtering Filtering enabled
Rapid Spanning Tree Protocol Enabled
Fast Start Enabled on front panel ports
RMON Alarm Enabled
Traffic Prioritization All ports prioritize NBX VoIP traffic (LAN and IP).
All ports set to “best effort” for all other traffic.
Port Security Disabled per port
Configuration Save and
Restore
Disabled
10014914AA.book Page 20 Friday, July 7, 2006 2:08 PM

Table of Contents

Other manuals for 3Com 4200G PWR

Related product manuals