68 CHAPTER 5: UPGRADING SOFTWARE
TFTP To upgrade software to your Switch using TFTP, do the following:
1 From the Boot Menu, select option 1 (Download application file to flash)
to display the following:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
2 Select option 1 to display the following:
Load File name:
Switch IP address:
Server IP address:
3 Enter the file name, Switch IP address and Server IP address to display the
following:
Are you sure to download file to flash? Yes or
No(Y/N)
4 Enter y and the following information is displayed to indicate the file is
downloading:
Attached TCP/IP Interface to netdrv0
Attaching network interface lo0...done
Loading.....done
Free flash Space: 10456064 bytes
Writing flash....done!
Please input the file attribute (main/backup/none):none
done!
5 Repeat step 1 tostep 4 for each of the remaining files.
FTP To upgrade software to your Switch using FTP, do the following:
1 From the Boot Menu, select option 1 (Download application file to flash)
to display the following:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
10014914AA.book Page 68 Friday, July 7, 2006 2:08 PM
To Next Page
Loading...
