64 CHAPTER 5: UPGRADING SOFTWARE
The following information is displayed if the download has been
successful:
200 PORT command successful.
150 Opening ASCII mode data connection for vrpcfg.def(10986
bytes).......226 Transfer complete.
FTP: 10986 byte(s) received in 8.046 second(s) 1000.00
byte(s)/sec.
7 To download the bootrom file, enter:
[ftp] get s3u01_00.btm
8 To download the web management file, enter:
[ftp] get s3v01_00.web
9 Exit FTP by typing: [ftp] bye.
10 To install the new bootrom code, enter:
[4200G] boot bootrom flash:/s3u01_00.btm
Type y when prompted:
This will update Bootrom on unit 1. Continue? [Y/N] y
Upgrading Bootrom, please wait...
Upgrade Bootrom succeeded!
11 To install the new application code, enter:
[4200G] boot boot-loader flash:/s3t03_01_00.app
12 To install the new web management code, enter:
[4200G] boot webpackage flash:/s3v01_00.web
13 Enter quit to exit.
10014914AA.book Page 64 Friday, July 7, 2006 2:08 PM
To Next Page
Loading...
