26 CHAPTER 3: RUNNING THE SETUP WIZARD
Password Figure 12 Change Administration Password Screen
When the Change Administration Password screen (Figure 12) appears,
type the Old Password, then a new password in both the New Password
and Confirm Password boxes.
3Com recommends entering a new password when setting up the Access
Point for the first time. The Access Point is shipped from the factory with
a default password, admin.
1. Password is case sensitive.
2. Write the new password down and keep it in a safe place, so that you
can change your settings in the future.
Click Next.
LAN Settings
Figure 13 LAN Settings Screen
This screen determines how the Access Point obtains its IP address. There
are three options.
To Next Page
Loading...
