50 CHAPTER 4: ACCESS POINT CONFIGURATION
System Tools The main frame of the System Tools screen includes three administration
items: Restart, Configuration, and Upgrade (Figure 34
).
Restart
Figure 34 Restart Screen
If your Access Point is not operating correctly, you can choose to restart
the Access Point by selecting Restart the Access Point, simulating the
effect of power cycling the unit. No configuration information will be lost
but the log files will be erased. Any network users who are currently
connected to the Access Point will have their access interrupted whilst the
restart takes place, and they may need to reboot their computers when
the restart has completed and the Access Point is operational again.
Configuration
Figure 35 Configuration Screen
To Next Page
Loading...
