A
USING DISCOVERY
Running the
Discovery
Application
3Com provides a user friendly Discovery application for detecting the
Access Point on the network.
If you are unable to use the Discovery application, the Access Point on
initial power-up will attempt to obtain an IP address from your local DHCP
server. Consult your DHCP Server log to obtain the IP address that was
allocated to your Access Point.
Windows Installation
(95/98/2000/Me/NT)
1 Insert the Access Point CD-ROM in the CD-ROM drive on your computer.
A menu will appear; select Discovery.
Discovery will find the Access Point even if it is unconfigured or
misconfigured.
Figure 44 Discovery Welcome Screen
To Next Page
Loading...
