28 CHAPTER 2: INSTALLING THE SWITCH
Placing Units On
TopofEachOther
If the Switch units are free-standing, up to four units can be placed one
on top of the other. If you are mixing a variety of SuperStack Switch and
Hub units, the smaller units must be positioned at the top.
If you are placing Switch units one on top of the other, you must use the
self-adhesive rubber pads supplied. Apply the pads to the underside of
each Switch, sticking one in the marked area at each corner. Place the
Switch units on top of each other, ensuring that the pads of the upper
unit line up with the recesses of the lower unit.
1697ua.bk Page 28 Monday, December 3, 2001 11:31 AM
To Next Page
Loading...
