3D Systems CUBE Lesson

Next Steps
If you have a DUO or TRIO follow the steps below.
 Level the print tips (refer to “leveling and Z-gap settings”
lesson)
 Set the print jet offsets (refer to “setting the print jet offsets”
lesson).
Note: Those sections will cover the following section.
 If you have a single head machine please continue.
11

3D Systems CUBE Specifications

General

Print technology	Plastic Jet Printing (PJP)
Printing material	ABS, Polylactic acid (PLA)
Number of printing colors	16
Maximum build size (WxDxH)	- mm
Plug and Play	Yes
USB version	2.0
Ethernet LAN	No
Card reader integrated	-
Product color	Silver