Log in to 3DSystems.com. Go to www.3dsystems.com/shop/account/login.5.
NOTE: You must be logged in to www.3DSystems.com to activate your
printer. If you have not activated an account, select SIGN UP or enter your
information on the signup page.
Navigate to http://3dsystems.com/shop/cubepro/activate.6.
NOTE: The serial number of your printer will appear on the printer’s
touchscreen display. Take note of the serial number. You will need it to
activate your printer. The serial number can also be found on a label
adhered to the right side of the printer near the power on/off switch.
NOTE: This illustration provides an example of a serial number. Do not use
this number to activate your printer.
Select the checkmark to continue.7.
Enter your serial number and select Activate.8.
NOTE: Your 4-digit activation code will appear. Please note the activation
code because it will need to be entered into the printer’s touchscreen
display to activate the printer.
To Next Page
Loading...
