Connect a USB A connector to your computer and connect the USB B connector (A) to1.
your printer.
NOTE: When the USB cable is connected, Windows will automatically obtain
the driver from Windows Update and install it. An internet connection is
required.
NOTE: Once the driver has been installed, you can print from any Windows
3D print-compatible application using the 3D print option.
Once the driver has been installed, you can verify that it installed properly when you2.
see the printer icon in the Devices and Printers section of the control panel.
NOTE: You can also view 3D Systems CubePro under Printers in the Device
Manager.
Menu Overview
Touchscreen Display
After powering on the printer and turning on the touchscreen display, touch the display to
continue.
To Next Page
Loading...
