ProJet
®
x60 Series User Guide Troubleshooting the ProJet x60 Printers
3dscentral.3dsystems.com 63 All Rights Reserved
5/12/13
7.12Additional Information
7.12.1 Materials
Visit the Materials section of our Web site to get the latest information on:
• Materials that are compatible with your printer.
• Best Practices to help you create the very best parts.
3dscentral.3dsystems.com
7.12.2 Service
Visit the Support section of our Web site for tips on maintaining your printer, troubleshooting problems, or
to contact our Service staff:
3dscentral.3dsystems.com
Error 1905 Explanation: This error is caused by a layer that is too large for
the printer’s buffer. The printer is unable to process the layer and
reports the error. This is most common with GIS, architecture, and
scanned files, which are usually very large.
Solution: Try rotating the part on the X-Z-axis to increase the
layer count and reduce the size of each layer. The risk in doing this
is 3DPrint is unable to check for layer size before it begins the
build. We recommend reducing the detail on the file and trying the
print again.
ERROR CODE
To Next Page
Loading...
