3D Systems Sense User Manual

SENSE SETTINGS
SCAN SETTINGS
Modify any scan settings to change the output accordingly.
l Orientation - toggle between landscape and portrait scan views. This corresponds to the way that is most comfortable
for you to hold the scanner.
l Resolution - determines the density of the scan data acquired; higher resolution will yield denser scans, but can slow
down the capture speed.
l Object Size - determines the size of the scan volume; you can specify this according to the size of the object you are
scanning.
n When Custom is selected, you can specify Width, Height, and Depth values.
n Prompt on Startup - you can toggle the object selection screen on or off at startup.
l Object Recognition - attempts to automatically identify and highlight the object you are scanning. The scan data will
automatically be cropped to remove everything but the identified object.
l Color - Toggle the acquisition of color from the scanner.
13 3D Systems, Inc.

3D Systems Sense Specifications

General

Color scanning	Yes
Duplex scanning	-
Input color depth	16 bit
Maximum scan size	3000 x 3000 mm
Optical scanning resolution	- DPI
Product color	Black
Daily duty cycle (max)	- pages
USB version	3.2 Gen 1 (3.1 Gen 1)
Standard interfaces	USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1)
Power supply type	USB
Power consumption (typical)	2.25 W
Minimum RAM	2048 MB
Minimum processor	Intel® Core™ i5
Minimum storage drive space	4096 MB
Operating temperature (T-T)	10 - 40 °C

Weight and Dimensions

Depth	129 mm
Width	33 mm
Height	178 mm