l Frame Rate - toggles the on-screen display of frames per second (FPS); useful for gauging your computer’s capability.
The maximum is 30 FPS; a good computer will scan at approximately 10-15 FPS. Anything below about 5 FPS is going
to yield a poor scanning experience.
l Target Ring - toggles the display of the target ring on your screen; it can be useful for keeping the scanner pointed at the
center of the object being scanned.
l Performance Test - measures your computer's CPUand graphics card processing power, and recommends the one
with the best performance. You are able to switch between the two; the blue highlighting indicates the selected data pro-
cessing method.
l Tutorial & Video - shows video on launch; shows on-screen tips for each step of the scanning process.
l About - information about the Sense scanner and software
EDIT AND ENHANCE SETTINGS
Specify any of the following settings during the editing process.
3D Systems, Inc. 14
To Next Page
Loading...
