3M 3M-Matic 8000a - 3. Safety (continued); 3.12 Component Locations

NA - ENG
April 2016
3M-Matic
™
8000a-8000a3
Page 10
3. Safety (continued)
3.12 Component Locations
Refer to Figure 3-9 below to acquaint yourself with the various components and
controls of the case sealer. Also refer to Manual 2 for taping head components.
Figure 3-9 8000a-8000a3 Case Sealer Components (Left Front View)
Upper Taping Head
Lower Taping Head
Height Adjustment
Handle
Electrical
On/O
Switch
Width
Adjustment
Crank
(Alternate)
Lower Tape
Roll Mount
(not shown)
Adjustable
Side Drives
Machine Bed
Infeed
Conveyor
(optional -
not shown)
Casters
(optional)
Emergency
Stop Button
Top Flap
Compression
Rollers
Exit Conveyor -
optional
(not shown)