NA - ENG
April 2016
3M-Matic
™
8000a-8000a3
Page 13
4.5 Set-Up Recommendations:
• Machine must be level.
• Customer supplied optional infeed and exit conveyors (if used) should provide
straight and level box entry/exit.
• Optional exit conveyor (powered or gravity) can help move sealed boxes away
from machine. Powered exit conveyor should match belt speed of case sealer
(100 feet per minute).
4.6 Tape
Scotch® pressure-sensitive lm box sealing tapes.
4.7 Tape Width
50mm [2 inch] minimum to 72mm [3 inch] maximum
4.8 Tape Roll Diameter
Up to 406.4mm [16 inch] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
®
lm tapes.)
4.9 Tape Application Leg Length – Standard
70mm ± 6mm [2.75 inch ±. 25 inch ]
Tape Application Leg Length – Optional
50mm ± 6mm [2 inch ±. 25 inch]
(See “Removing Taping Heads Procedure – Changing the Tape Leg Length”)
4.10 Box Board
Style – regular slotted containers – RSC
125 to 275 P.S.I. bursting test, single wall or double wall B or C ute.
23-44 lbs. per inch of width Edge Crush Test (ECT)
4.11 Box Weight and Size Capacities
A. Box Weight, lled: 5 lbs.– 85 lbs. [2.3 kg–38.6 kg]. Contents must support aps.
B. Box Dimensions for 8000a and 8000a3 Machines: Inches [mm]
To accommodate smaller or larger boxes, machine upper taping head frame and/or outer
column assemblies can be repositioned as described in “Special Set-Up Procedure”
section of this manual. Refer to illustration/chart for box height range possibilities by
adjusting machine upper frame and/or outer column positioning.
4. Speci cations (continued)
A Standard Pos. B Fully Raised Pos.
Length 8000a Width 8000a3 Width AG 3 Tape Leg
(i.e. 2 3/4" [70])
Mínimum 6" [152] 4 1/2" [114] 5 1/2" [140] 5" [127] 12 3/8" [314]
Máximum 21 1/2” [546] 21 1/2" [546] 28 1/2" [724] 35 3/4" [908]
To Next Page
Loading...
