3M CP45 - Basic Operations; Recording a Video Clip; Taking a Still Picture

7
English
Basic Operations
Recording a Video Clip
1
Press the Up/Down ( / ) arrows to zoom in or zoom out.
2
Press the Record ( ) button to start recording. The Record ( ) button will
turn red in recording mode, and the video recording timer will start rolling.
3
Press the Record ( ) button again to stop recording. The Record ( )
button will turn white to indicate is in standby mode.
4
While in recording mode, press the OK ( ) button to pause recording. Press
the ( ) button again to resume recording.
1
Press the Up/Down ( / ) arrows to zoom in or zoom out.
2
Press the Camera ( ) button to take a picture.
Taking a Still Picture
The power saving feature will automatically stop the video recording after 25 minutes. If
you want to continue recording, press the “Record” button again.
To improve image quality in low light conditions, press the Right arrow to turn on the LED
ash light. Press again to turn off the LED ash light.
Option Icon Description
On Enable LED ash light.
To improve image quality in low light conditions, press the Right arrow to turn on the LED
ash light. Press again to turn off the LED ash light.
Option Icon Description
On Enable LED ash light.
© 3M 2011. All Rights Reserved.
3M™ Camcorder Projector CP45