3M CP45 - Converting Video Files

16
Converting Video Files
Use ArcSoft Media Converter™ software (included in the CD) to convert video les into formats
compatible with your Camcorder Projector. To convert video les, install the software to your
computer and then perform the following steps.
Figure 2: Steps to convert video les on ArcSoft Media Converter™
1
3 4
2
1
Click , and then select the video les from your local drive that you want to
convert. The video le is added to the list.
2
Click the Select Conversion Settings list ( ) button and select the video le
format “H.264-MP4” (format supported by your Camcorder Projector).
3
Click to select the folder location to save the le after conversion.
4
Click to execute le conversion.
Note: ArcSoft Media Converter™ is not supported on Macintosh computers or on
computers running Mac OS.
© 3M 2011. All Rights Reserved.
3M™ Camcorder Projector CP45