Installation Instructions G5 - Revision C, September 2019
1
3M™ Drive-Thru System Model G5
Installation Instructions G5
Revision C, September 2019
Table of Contents
1. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A. Safety Information................................................................................................................3
B. Other Conventions...............................................................................................................5
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
A.
Overview of Installation ......................................................................................................7
B. Required Materials (Not Supplied) ....................................................................................7
C. Design the Installation .........................................................................................................7
D. Install the Battery Charger..................................................................................................9
E. Install the Order Point Speaker and Microphone Assemblies......................................12
F. Install the Vehicle Detector(s)............................................................................................13
G. Assemble the 3M™ Drive-Thru Headset G5...................................................................13
H. Install the Basestation..........................................................................................................15
I. Connect the Components...................................................................................................17
J. Basestation to Component Wiring ....................................................................................20
K. Auxiliary Detector Relays....................................................................................................21
L. Installing Accessory Boards in the Basestation...............................................................23
M. Power Up ...............................................................................................................................26
3. Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
A. Enter Configuration Mode..................................................................................................28
B. Navigating the Basestation Display...................................................................................28
C. Finding the MAC Address of the G5 Basestation...........................................................30
D. Configuring with a Computer ............................................................................................30
E. Logging into the Basestation with a PC............................................................................31
F. Switching Between Lane 1 and Lane 2 .............................................................................31
G. Menu Options for Lane 1 and Lane 2 ................................................................................32
H. Change Basic Volume Settings ..........................................................................................33
I. Change Noise Reduction Level..........................................................................................38
J. Set System Date and Time..................................................................................................38
K. Change Global Settings.......................................................................................................38
L. Haptics “Vibration” Alerts and Blue LED Alerts on Headsets .......................................41
M. Order Taking Modes Setup ................................................................................................41
N. Change Site Scheduling ......................................................................................................42
O. Change Site Information .....................................................................................................42
P. Digital IO Setup ....................................................................................................................43
Q. Change Passcodes ...............................................................................................................43
R. Split- and -Cross Lane Mode .............................................................................................44
S. Installer Setup .......................................................................................................................44
T. Factory Setup (Restore Factory Defaults)........................................................................45
U. Create and Load Templates ...............................................................................................45
V. Reboot System......................................................................................................................45
W. Check the Revision Levels ..................................................................................................45
To Next Page
Loading...
