Installation Instructions G5 - Revision C, September 2019
39
3M™ Drive-Thru System Model G5
Installation Instructions G5
Revision C, September 2019
In half-duplex installations, all latching order taking modes and hands-free mode are disabled.
Perform the following procedure to change the drive-thru audio mode:
• Enter the Basetation configuration mode, see “Enter Configuration Mode” on page 28, and choose 1 System Menu.
• Change the value for 07 Global Settings > Drive-Thru Audio Duplex Mode to Full or Half.
• In half-duplex systems, when the order taker is speaking, it is impossible to hear any speech coming from the
customer order point.
• In full-duplex systems, the order taker can speak and hear speech coming from the customer order point at
the same time.
Page Channel Heard by Order Taker
You can enable or disable the order taker from being able to hear any paging while speaking to a customer over the customer order point.
This may prevent interference with the order taking process.
Perform the following procedure to enable or disable pages to the order taker while they're talking:
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Select 07 Global Settings.
• To enable or disable pages to the order taker while they're talking, change the value for PAGE Channel Heard by Order Taker:
to NO or YES.
Store is Now Closed Prompt
Perform the following procedure to enable or disable the automatic store closed prompt to let customers know in your absence that the
store is closed:
Make sure that you disable the automatic store closed prompt in stores that are open 24 hours.
• Enter the Basestation configuration mode (see "Enter Configuration Mode" on page 28) and choose 1 System Menu.
• Change the value for 07 Global Settings > ’’Store is Now Closed’’ Prompt? to Yes or No.
Pull Ahead Prompt
You can let customers know to pull ahead when they are at Order Point #2 in a tandem drive-thru when:
• It is out of service.
• No car is present at Order Point #1.
Figure 27.
To Next Page
Loading...
