Vers. (11/02)
Pentamix
TM
2
6
General Description
4.1 Description of the Product
CAUTION
The power supply for the PENTAMIX 2 is 230V~
(US: 120V~). This means that parts of the unit carry
hazardous voltages! Make sure you always remove the
mains plug before performing repairs.
The applicable accident prevention regulations, VDE
regulations and operating instructions for the PENTAMIX 2
should be observed.
Make sure you always follow the repair procedure in its
proper order to prevent any injury.
Before starting up the unit for the first time, check that the
operating voltage and frequency indicated on the rating
plate correspond to the supply voltage and frequency
available.
Do not lock the start button of the PENTAMIX 2 to avoid
hazardous situations and non-stop operation.
The PENTAMIX 2 is an automatic dispensing and mixing unit for ESPE PENTA
impression materials. The PENTA impression materials designed for use with this unit
are supplied in polythene bags. Only this type of packaging can be used with the
PENTAMIX 2.
The polythene bags are inserted in the unit using sturdy, product-specific marked
cartridges. They permit product changeover and refilling without any wastage or need for
intermediate cleaning.
The unit is suitable for either tabletop use or wall mounting.
See the operating instructions for the PENTAMIX 2 for how to fill, insert and start up a
cartridge.
To Next Page
Loading...
