EasyManua.ls Logo

3M SCOTT AIR-PAK X3 PRO - Page 16

3M SCOTT AIR-PAK X3 PRO
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3M SCOTT AIR-PAK SCBAS
P/N 595373-01 Rev C 202004
xiv
* CBRN: chemical, biological, radiological, and nuclear
** IDLH: immediately dangerous to life or health
CAUTION
The following table lists hazardous situations which, if not avoided, could result in minor or moderate injury and/or property damage
Read all of the caution statements before beginning any of the procedures in this manual.
Follow the instructions below...
... to reduce the risk associated with...
Dermal exposure
to contaminants
Entanglement
Explosion
Exposure to
contaminants
Exposure to CBRN*
environments
Exposure to
extreme heat
Fire
Impact
Impact from
falling or tripping
Loss of air supply
Oxygen-deficient
atmospheres
Reduced service
life
Inspect the coupling seal and replace if missing or damaged. A missing or damaged seal will result in an air leak, reduce the
duration of use, or may prevent the end-of-service alarm from actuating.
X X X
Inspect the high-pressure seal and replace if missing or damaged when replacing the cylinder. A missing or damaged seal
will result in an air leak and reduce the duration of use.
X X X

Table of Contents

Other manuals for 3M SCOTT AIR-PAK X3 PRO

Related product manuals