To Next Page

To Previous Page



3.7 Delete a group or individual projector

You can delete a group of projectors or an individual projector. Click a group or projector in the tree view, select

[Edit]  [Delete]. You can also delete a group or projector by clicking the delete icon on the toolbar. When the

confirmation dialogue appears, select [OK] to delete.

3.8 Change a group or individual projector settings

You can change a group or individual projectors settings. Click a group on the tree view, select [Edit]  [Edit].

Or Click a projector, select [Edit]  [Edit]. You can also change settings by clicking the edit icon on the toolbar.

 The ‘Edit Group’ or ‘Edit Projector’ screen is shown below. Content to be set is same as ‘Add Group’ or ‘Add

Projector’ screen.

3.9 Copy

You can copy the projector from the tree view. Select [Edit]  [Copy] on the menu after choosing a projector

from the tree view. You can paste copied projectors by selecting [Edit]  [Copy] from the menu or click the

“Paste” button on the tool bar.

Also you can copy projectors by drag and drop by holding down Ctrl key. Note that you cannot copy projectors if

the name is the same of the destination projector.

3.10 Move

You can move projectors in the tree view. Select [Edit]  [Cut] on the menu or click “Cut” on the tool bar after

choosing projectors on the tree view. You can paste copied projectors by selecting [Edit]  [Copy] from the

menu or by clicking the “Paste” button on the tool bar.

You can also drag and drop projectors onto another projector group.

3M X46 Application Guide

Other manuals for 3M X46