To Next Page

To Previous Page



3.25.3 Control User-defined Model

(1) Power On

Select [Control]  [Power ON] to turn on the power. You can also turn on the power by clicking the power

on icon on the toolbar. If you select a group of projectors, all projectors in the group are powered on.

(2) Power Off

Select [Control]  [Power OFF] to turn off the power. You can also turn off the power by clicking the power

off icon on the toolbar. If you select a group of projectors, all projectors in the group are powered off.

(3) Command No.1-10

Select [Control]  [Execute Command] to execute a command.

(4) Schedule

Only Power On / Off commands are allowed as the schedule event for User-defined model.

3.26 Open the build-in HTML page in the projector

You can access the projector built-in HTML page from PJMan directly. Select the projector from the tree view,

and then go to [Option]  [Open with] from the menu. The default browser on your computer will launch

automatically and access the selected projector HTML page. This function supports embedded network

projector models only.

3M X46 Application Guide

Other manuals for 3M X46