3ntr A2v2 - Page 51

Index
Congratulations!.................................................................................................................2
Important safety advice........................................................................................................4
LIMITED WARRANTY............................................................................................................5
Unpacking..........................................................................................................................7
Installation.........................................................................................................................9
Using the printer with your computer.....................................................................................14
Printer use.......................................................................................................................19
Loading filament........................................................................................................19
Filament removal – idle machine...................................................................................21
Filament removal – running machine.............................................................................21
Changing filament type...............................................................................................22
Placing print tray.......................................................................................................23
Printing...................................................................................................................24
Print removal............................................................................................................25
Extruder assembling...................................................................................................26
Extruder change................................................................................................................27
Routine maintenance..........................................................................................................29
Filament handling......................................................................................................29
Printing tray cleaning.................................................................................................29
Print tray surface reconditioning...................................................................................29
Feeding roller cleaning...............................................................................................30
Extruder cleaning.......................................................................................................30
Fitting the soft polymer feeding unit (SPFU)....................................................................31
Nozzle Z leveling.......................................................................................................33
XY nozzle calibration..................................................................................................35
Planned maintenance.........................................................................................................38
Heat exchanger and liquid reservoir...............................................................................38
Lubrication...............................................................................................................38
Firmware update........................................................................................................39
Firmware update - procedure........................................................................................40
Octoprint configuration (print server).............................................................................41
LCD printer panel...............................................................................................................42
Info screen...............................................................................................................42
MAIN Menu..............................................................................................................42
PREPARE menu.........................................................................................................43
TUNE menu...............................................................................................................43
PREHEAT menu (PLA/ABS/GUM)..................................................................................44
MOVE AXIS menu.......................................................................................................44
CONTROL menu.........................................................................................................44
TEMPERATURE menu.................................................................................................45
PREHEAT PLA/ABS/GUM CONF menu............................................................................45
MOTION menu...........................................................................................................46
Troubleshooting................................................................................................................47
#1 – Little or no extrusion...........................................................................................47
#2 – Part won't stick to the plate...................................................................................47
51