Calibrating tanks with complex shapes
If there are some curves or other peculiarities in the tank’s shape, be sure to reduce
the volume of portions when the fuel level rises to that peculiarity of the tank. Once past
that shape’s peculiarity, switch back to the previous volume of portions.
Let’s imagine that you do the tank calibration with portions of 10 liters just like before.
The level gets to some peculiarity of the tank’s shape.
Fig. 64 Reducing portions’ volume
You reduce the portions’ volume from 10 to 5 liters. And keep adding the portions until
the level is above the problematic part.
To Next Page
Loading...