3scort TD-BLE - Connecting a Sensor to a Smartphone; Geolocation

Connecting a sensor to a smartphone
To configure any TD-BLE sensor, to calibrate it and to do the tank calibration, you need to use
Escort Configurator app available on iOS and Android devices (hereinafter - the “app”).
Geolocation
Run the configurator. Be sure to give it access to your smartphone’s geolocation. Activate the
Bluetooth and the geolocation of your smartphone (Fig. 1). The app must have access to the
geolocation due to the requirements of the AppStore and GooglePlay (Fig. 2).
Fig. 1 GPS (geolocation) and Bluetooth
activated
Fig. 2 Location permissions
5