Page 7
1. General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to this product or to any products
connected to it.
To avoid potential hazards, use this product only as specified.
There are no user-serviceable parts inside this equipment.
Do not remove covers.
Do not operate with suspected failures. If you suspect that there is damage to this product, refer to 4Links
for advice.
Do not operate in wet or damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation. The air inlet and outlet on the rear panel must not be obstructed.
1.1. Terms in this Manual
Caution:
Caution statements identify conditions or practices that could result in damage to this
product or to other property