4RF Aprisa SR+ - Rack Shelf Mounting; Wall Mounting

16 | Introduction
Aprisa SR+ Product Description
Rack Shelf Mounting
The Aprisa SR+ can be mounted on a rack mount shelf using the four M4 threaded holes in the Aprisa SR+
enclosure base. The following picture shows two Aprisa SR+ radios mounted on 1 RU rack mount shelf.
Wall Mounting
The Aprisa SR+ can be mounted on a wall using the two holes through the enclosure (5.2 mm diameter).
Typically, M5 screws longer than 35 mm would be used.