4RF Aprisa SR+ - Configuring the Aprisa SR+ Radio Settings

34 | Management
Aprisa SR+ Product Description
Configuring the Aprisa SR+ Radio Settings
The SuperVisor software enables operators to set the radio settings including:
TX Frequency
– sets the Transmit frequency in MHz
TX Power
– sets the Transmit Power in dBm
RX Frequency
– sets the Receive frequency in MHz
Modulation Type
- sets the Modulation Type QPSK to 64 QAM
Channel Size
- sets the Channel Size 12.5 kHz or 25 kHz
Antenna Port Configuration
- sets the Antenna Port Configuration to single port or dual
port