BRAKE ROD JOINT LUBRICATION
A few drops of engine oil on each brake rod yoke end pin and on the threaded portion
of brake rod. (One pin on yoke each end of brake rod and on bottom of front brake
cable.)
BRAKE PEDAL LUBRICATION
Grease nipple in heel of foot brake pedal.
SPEEDOMETER LUBRICATION
When a grease nipple is not fitted to gear box drive, further lubrication is not necessary.
STEERING HEAD BEARING LUBRICATION
One grease nipple on front frame head lug and another on right hand side of handlebar
lug.
CONTROL LEVER LUBRICATION
Occasionally a drop of engine oil on all moving parts of the handlebar control levers
If twist grip is too stiff: remove two screws binding the two halves of the clip. This
releases the grip which may be pulled off the handlebar. Smear handlebar, the drum
on which the inner wire is wound and the friction spring on the half clip with grease and
replace.
REAR FORK HINGE
Heavy Gear Oil SAE 140 (see page 61).
To Next Page
Loading...