PRESET SAVING & DELETING OPERATIONS
Bank 1 through 4 are reserved for 40 user custom presets. Depending on the situations, user
can call up any saved presets with just a push of a button.
Preset Saving - To begin saving a preset, user must select a memory allocation for the preset
that is to be saved.
1. Press BANK to scroll through Bank 1 - 5 (Bank 5 is reserved for Hot Key Presets), then press
preset button 1 - 10 to select a designated memory allocation.
2. Set the custom setting (shutter speed, iris, exposure setting, white balance, etc).
3. Press SAVE button to save. A confirmation prompt will show up on the LCD screen, use F2
to select saving or canceling, then press ENTER to confirm.
Preset Deleting- To begin deleting a preset, user must first select a preset that is to be deleted
(Doing so will also load up the preset).
1. Press BANK to scroll through Bank 1 - 5 (Bank 5 is reserved for Hot Key Presets), then press
preset button 1 - 10 to select a preset.
2. Confirm and load up the preset.
3. Press DEL button to delete. A confirmation prompt will show up on the LCD screen, use F2
to select deleting or canceling, then press ENTER to confirm.
To Next Page
Loading...
Need help?
General