A&D UA-705 - Average Reading Feature; Pressure Rating Indicator Guide

E-10
About Average Reading
The UA-705 provides an average blood pressure
reading based on the total measurements stored
in memory. When taking a measurement, the
average blood pressure reading will appear and
the number of measurements stored in memory
will ash several times before the cuff begins
to inate. The average blood pressure reading
will also appear briey when you recall the
measurements stored in memory.
About Pressure Rating indicator
™
The Pressure Rating Indicator
™
is a feature which
provides a snapshot of your blood pressure
classication based on your measurements.
This will let you quickly know what your blood
pressure readings mean. Each segment of
the bar indicator corresponds to the Seventh
Report of the Joint National Committee (JNC7)
on Prevention, Evaluation and Treatment of
High Blood Pressure from the National Heart,
Lung and Blood Institute - May 2003. For
a more detailed look at this blood pressure
classication, please refer to “Assessing High
Blood Pressure” on page E-13.
: The indicator displays a segment, based on the current
measurement, corresponding to the JNC7 Classication.
NOTE: Due to other risk factors (e.g. diabetes, obesity, smoking, etc.) in addition to your blood
pressure measurement, the Pressure Rating Indicator is approximate. Please consult with your
physician for interpretation and diagnosis of your blood pressure measurements.
NOTE: Residents outside of the United States (e.g.. Canada and Mexico) should refer to the WHO
Classication Table on page E-13 for assessment of their blood pressure measurement.
Average
Number of Measurements
Stored in Memory