Contents
Firmware V 1.0 / © 2005-2013 by Aaronia AG, D-54597 Euscheid, www.aaronia.com
4
Chapter Page
8.3 Choosing the right filter (RBW) 35
8.4 Choosing the right sampletime (Sptime) 35
8.5 Measurement of electric fields and above 500kHz 36
8.6 Sensitivity 37
8.7 Measurement inaccuracy 37
8.8 The cursor and zoom features 38
8.9 DFT mode (rapid measurements with small RBWs) 39
8.10 Choosing the right attenuator 39
8.11 The Autorange function 40
8.12 Spurious 40
9.0 Measurement of static magnetic fields 41
10.0 Measurement in 1D, 2D or 3D 42
11.0 Aligning the sensor 43
12.0 Physical units 44
13.0 Tips and tricks 45
14.0 Exposure limits 47
14.1 Limits for personal safety 47
14.2 Device limits 48
14.3 Construction-biological limits 49
15.0 Connections 50
15.1 SMA input (measurement of external signals) 50
15.2 External DC input (battery charging) 51
15.3 Audio output 52
15.4 Jog Dial / Volume control 52
15.5 USB connector 52
16.0 Typical readouts in practice 53
17.0 Conversion tables 54
18.0 Tables 56
19.0 Spectrum analysis basics 57
20.0 Warranty 62
21.0
Developer-Net, User Forum and more! 63
22.0 Antenna and Analyzer frequency charts 64
To Next Page
Loading...
Need help?
General
